Machinery and Equipment

Now there is a new way that you can save energy in your home! By installing a HI TEMP Heat Pump it is possible to reduce the electricity consumption in your geyser by 70%.

Key Benefits

• uses up to 70% less household energy in heating your water - costing you less
• quiet operation, with no unsightly solar collectors on the roof
• compact and easy to install plug in system
• can be retro-fitted to existing geysers
• can be used in conjunction with solar heaters
• fully automatic control with adjustable water temperature setting
• Cool air created as a by-product can be used to ventilate your home environmentally responsible ? extremely energy efficient, with no Greenhouse Gas emissions

Simplicity ? "savings with out complications"

One of the HI TEMP heat pumps greatest attributes is its ease of installation. The product has been specifically designed for South African conditions. The installation is neat and compact. It does not rely on direct sunlight to offer great performance so there is no need to clutter up your roof lines or irritate your neighbours with unsightly panels. The heat pump may be mounted low to the ground towards the rear of your home. HI TEMP helps manage your hot water heating consumption where each installation can be tailored to your personal requirements. HI TEMP Heat Pumps are supplied with user friendly wired remote controllers that allow quick and easy access to water temperature, running times and system diagnostics

see http://heatpumps.co.za/

The down hole drill is a new, highly efficient and extensively applied open-air rock drilling equipment, which is extensively suitable for small and medium sized mines and the projects such as communications, national defence, water conservancy and stonework, in particular the rough and rugged terrains and land forms where other drills are unable to operate normally. The machine can be used for water drilling and to drill blast holes on mines. It can also be used to drill under roads for cable lines.

The specifications for the machine are listed below.

SQ110 Pneumatic and Hydraulic

Down Hole Drilling Set Model

• Suitable Rock Rigidity (f) 6-20

• Bore Dia. (mm) 68-130

• Pushing Length (mm) 1000

• Rotation Speed (rpm) 0-70

• Working Pressure (Mpa) 0.5-0.7

• bar 5-7

• Air Consumption(m3/min) 3.5-7.2

• cfm 124-424

• Max. Pushing Force (N) 4500

• Max. Lifting Force (N) 15000

• N.W (kg) Drill Part 260

• Pumping Station 261

• Control Station 50

• Appendant 360

• G.W (kg) Drill Part 4230

• Pumping Station 330

• Control Station 65

• Appendant 362

• Dimension Drill Part 2180 × 510 × 790

• Dimension Pumping Station 1170 × 980 × 1050

• (L × W × H) (mm) Control Station 700 × 500 × 900

http://www.directimports.co.za

Main Benefits:

u  Easy installation with built in TCP/IP or USB or flash disk

u  Date driven reporting for normal time, over time and absentees

u  You can use fingerprints or cards

u  Easy exports to Pastel Payroll and VIP Payroll

u  Can be used in high dirt / dust industries

u  Made to the highest specifications

u Multiple shifts support

u   No License fees or cost for additional employees

u  Vocal warning for fingerprint acceptance / refusal with name display

R2995.00 excl VAT*

excludes setup and training.  Special limited price as stocks last

Call us on 0828003215 or email info@machinetech.co.za for more info

No glue needed, reliable performances, easy to operate, low price, money saving, time saving, labour saving. It is capable of edge adhesion, wrapping thread, splicing in an easy way. It is an ideal tool for the post production for spraying industry. Giving up of splice joint by brand 502, you may reduce the high cost to a low level.
Field of application
Applied in the field of spraying cloth, shearing cloth, baoli cloth, havelock, lamp house cloth, plastic cloth.

Main technical details
1. Rated voltage: AC220V
2. Frequency: 50HZ-60HZ
3. Power: 1500W
4. Stroke speed: 1-15m/min
5. Specification: 40*18*20 cm
6. Deadweight: 15KG
7. Splicing width: 2-5cm

Call Glen 0828006591

on special for R 7,999.00

or visit www.machinetech.co.za

Product Information
The down-hole drill is a new, highly efficient and extensively applied open-air rock drilling equipment, which is extensively suitable for small and medium sized mines and the projects such as communications, national defence, water conservancy and stonework, in particular the rough and rugged terrains and land forms where other drills are unable to operate normally.The machine can be used for water drilling and to drill blast holes on mines. It can also be used to drill under roads for cable lines.

To view a video demo we uploaded to YouTube click here

The below list is the specifications for the machine.

HQ110 Pneumatic and Hydraulic Down Hole Drilling Set Model
Suitable Rock Rigidity(f) 6-20
Bore Dia.(mm) 68-130
Pushing Length(mm) 1000
Rotation Speed(rpm) 0-70
Working Pressure(Mpa) 0.5-0.7
bar 5-7
Air Consumption(m3/min) 3.5-7.2
cfm 124-424
Max. Pushing Force(N) 4500
Max. Lifting Force(N) 15000
N.W (kg) Drill Part 260
Pumping Station 261
Control Station 50
Appendant 360
G.W (kg) Drill Part 4230
Pumpting Station 330
Control Station 65
Appendant 362
Dimension Drill Part 2180×510×790
Diemension Pumping Station 1170×980×1050
(L×W×H)(MM) Control Station 700×500×900

Note: Please be advised that you need to mention your depth requirements. Additional drill rods cost R250 each and are 1m in length.